The Interactive guide arm system MaroBeam ™ MK-II was developed as a midrange system to ensure accurate positioning of Marotape®. It allows your operators to adjust the position of each tape individually from the operator side of corrugator during its operation.
A digital display indicated the position of each arm guide and allows their movement to precisely reach the desired position. The MaroBeam ™ MK-II also allows movement of each guide arm across the width of the corrugator.
A digital display indicated the position of each arm guide and allows their movement to precisely reach the desired position. The MaroBeam ™ MK-II also allows movement of each guide arm across the width of the corrugator.
The system is equipped with wheels, like all Marotech Inc. equipment, which permits its removal from the corrugator when the system is not required and store it at a predetermined location.
All the preparation of the system can be made offline. Then when required, the system is inserted between the glue machine and the double backer of the corrugator, even during its operation.
Standard Features
• Several models are available to use 4, 6 or 8 Marotape® simultaneously across the width of the corrugator.
• The corrugator width that can be covered is 100 inches (2.5 meters)
• A digital display shows the position of each guide arm
• Adjustment of the position of the tapes is made by the side of the MaroBeam™
• Each ribbon may be moved over the entire width of the corrugator
• Temposonics® positioning system that does not require calibration
• System completely covered to protect internal components.
• An insertion rail which is fastened to the corrugator facilitates the use of the MaroBeam™
• A cascade is mounted on the apparatus for positioning the tape dispenser at any angle relative to MaroBeam ™ MK-Il
Standard Features
• Several models are available to use 4, 6 or 8 Marotape® simultaneously across the width of the corrugator.
• The corrugator width that can be covered is 100 inches (2.5 meters)
• A digital display shows the position of each guide arm
• Adjustment of the position of the tapes is made by the side of the MaroBeam™
• Each ribbon may be moved over the entire width of the corrugator
• Temposonics® positioning system that does not require calibration
• System completely covered to protect internal components.
• An insertion rail which is fastened to the corrugator facilitates the use of the MaroBeam™
• A cascade is mounted on the apparatus for positioning the tape dispenser at any angle relative to MaroBeam ™ MK-Il
Optional Features
• System for adjusting the height of MaroBeam System ™ MK-II
• Pulleys of different widths are available for the use width all Marotape® products.
All positions can be adjusted with precision from the operator side of the MaroBeam™.
