MaroBeam™ Mk I

The manually adjustable guide arm system MaroBeam™ MK-I was developed as an entry-level system for inserting the Marotape® into the corrugator and allow your operators to adjust the position of each tape individually from the operator side of the corrugator during its operation.

The system is equipped with wheels, like all Marotech Inc. equipment, which permits its removal from the corrugator when the system is not required and store it at a predetermined location.

The system is equipped with wheels, like all Marotech Inc. equipment, which permits its removal from the corrugator when the system is not required and store it at a predetermined location.

The MaroBeam™ MK-I system uses an aluminum beam on which each guide arm is installed and positioned manually using a precision screw. All the preparation of the system can be made offline. Then when required, the system is inserted between the glue machine and the double backer of the corrugator, even during its operation.
If the position of a tape should be changed during the production, it can be easily done by turning the appropriate adjustment screw on the side of the MaroBeam™.

Standard Features

• Several models are available to use 4, 6 or 8 Marotape® simultaneously across the width of the corrugator.

• The corrugator width that can be covered is 100 inches (2.5 meters)

• Adjustment to the position of the tapes is made by the side of the MaroBeam™

• Each tape can be moved + / - 3 inches (+/ - 76 mm)
• Standard dimensions are 169 inches (4.3 m) length. x 26 inches (0.7 m) wide x 75 inches (1.9 m) high.
• Adjustment of the trim from the side of the MaroBeam™, whereas all the tapes may be moved at the same time +/ - 3 inches (+/ - 76 mm)
• An insertion rail which is fastened to the corrugator facilitates the use of the MaroBeam™
• A cascade is mounted on the apparatus for positioning the tape dispenser at any angle relative to MaroBeam ™ Mk-I

Standard Features

• Several models are available to use 4, 6 or 8 Marotape® simultaneously across the width of the corrugator.

• The corrugator width that can be covered is 100 inches (2.5 meters)

• Adjustment to the position of the tapes is made by the side of the MaroBeam™

• Each tape can be moved + / - 3 inches (+/ - 76 mm)
• Standard dimensions are 169 inches (4.3 m) length. x 26 inches (0.7 m) wide x 75 inches (1.9 m) high.
• Adjustment of the trim from the side of the MaroBeam™, whereas all the tapes may be moved at the same time +/ - 3 inches (+/ - 76 mm)
• An insertion rail which is fastened to the corrugator facilitates the use of the MaroBeam™
• A cascade is mounted on the apparatus for positioning the tape dispenser at any angle relative to MaroBeam ™ Mk-I

Optional Features

• System for adjusting the height of the MaroBeam™ Mk-I
• Pulleys of different widths are available for the use of all Marotape® products.

Close